Dan Krill's BLOG on BinaryBedlam
User: Anonymous

  
Initiate Login


Back To BinaryBedlam           BLOG Home           BLOG Table of Contents



Jidetech Outdoor Dome POE IP camera Dongle Wiring
November 30, 2020 11:43 PM

                       The rj-45 connector got so corroded after being outside for 9 months that one of the pins broke preventing the whole unit from powering on. As a result, I needed to replace the connector, but found that the wiring was a non standard color scheme.
        So to determine how to splice the wires of a new connector to the original cabling, I used a continuity tester with fine point probes on each remaining pin of the old connector to see the wiring order. After mapping out the color order, I could solder and heat shrink the conductors.

     

Add comment




Back to BinaryBedlam






BinaryBedlam's Basic Web Development 2010© .
Created by Dan Krill of BinaryBedlam (The Programing Div of Krill Labs);
    This site and any of its subsidiary components, which include but are not limited to:    
    Graphical Design and Layout, Images, and Decals; are the property of the owner and    
should not be used with out expressed written consent from the Web Admin.