|
|
|
|
Features - Shotgun Server
|
Donor Case:
-Aluminum Take-Down Shotgun Case
-Also works for many assault-style rifles, up to 34" long
-2 snap-latches with lock loops to add your own extra security
-Combination lock built-in
-Full-seam piano hinge
-36 x 15 x 4 5/8 inches
-Weighs 13 lbs., 1 oz. (minus the goodies and modifications)
Features:
-Mobility. This case has a fully padded handle and rugged shell, making it easy to transport anywhere you need it.
-Huge 32 x 11in. window constructed of ¼ inch Lexan® polycarbonate sheet, installed with an aluminum trim and sealed with an industrial adhesive.
-A standard ATX motherboard rack for ATX motherboards 12in x 10.5in or less.
-Authentic Antec® hard drive cages, modified for our application. Each hard drive cage is fit with its own 80mm fan to ensure acceptable airflow.
-(2) 12in cold cathodes, controlled by a mounted rocker switch.
-(6) 80mm LED fans with chrome fan grills included.
-(1) VGA, (2) USB, (1) Network, and (1) power input mounted flush to the outside of the case.
-(2) Bright 5mm LEDs mounted in polished surrounds for power and hard drive activity.
-380watt Raidmax power supply.
Options:
*Variable intake and exhaust fan controller. Includes (2) aluminum stereo knobs.
*Patch Panel (includes 3 plug internal power strip used to power up to (2) internal switches).
*Extra Ports Package. Includes an additional (2) USB, (2) firewire, (1) PS2, and (1) Line-in, Line-out, Speaker.
*Power supply modification. Includes clear acrylic cover and up to (2) additional LED fans.
*****Tips for fitting hardware:*****
1). Any standard ATX motherboard 12in x 10.5in or less will fit. Most Extended ATX motherboards will also fit.
2). We recommend low profile PCI/AGP cards. Low profile network cards, hard drive controllers, and video cards are readily available.
3). We recommend no abnormally long PCI/AGP cards. You may have to relocate/remove an exhaust fan to accomidate.
4). Most OEM heatsink/fan combinations will work. A low profile setup may be required.
5). We recommend the use of Serial ATA devices, as it saves a lot of space and hassle with cable management.
6). If a patch panel and switch setup is used, we recommend the Netgear FS116 16pt 10/100mbit. Any similarly sized switch with a small footprint will work.
Hardware specs of pictured server: (None of these parts are included with our cases.)
*This is just to give you an idea of the system we run*
Motherboard: ECS L7VMM2 VIA® KM266
Processor: AMD Athlon XP 2200+
Memory: 2x 512mb Micron pc2100
Video: Integrated ProSavage 8
Audio: Integrated AC97
Network: Integrated 10/100mbit and Intel ProMT 1000mbit
RAID adapter: Highpoint 1820a 8-channel Sata
Hard drives: 1x 40gb Seagate Barracuda IDE and
4x 250gb Western Digital SATA
Power Supply: Aspire 400watt
Switches: 1x Netgear 16 port 10/100mbit
1x SMC 5 port 1000mbit
|
|
|
|
|
